1. |
Remove the negative (-) battery terminal.
|
2. |
Remove the driver seat in the car.
(Refer to Body - "Front Seat Assembly")
|
3. |
Remove the IMS module (A) after loosen the screws.
|
4. |
Disconnect the connectors (B) from the IMS module.
|
SS-B Solenoid Valve(ON/OFF) Specifications
ON/OFF Solenoid Valve(SS-A, SS-B)
▷ Control type : Normal low type
Control pressure kpa (kgf/cm², psi)
490.33(5.0, 71.12)
Internal resistance(Ω ...
Removal
1.
Remove the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
2.
Remove the concentric slave cyl ...
Description
Component location : Manual transaxle
case
Operation principle : Back up lamp
switch is pushed by the reverse lug sliding when select arm, and switches the
back up lamp.
Funct ...