Kia Forte: Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / Brake System / Master Cylinder / Installation
| 1. |
Install in the reverse order of removal.
|
| 2. |
After installation, bleed the brake system.
(Refer to Brake system bleeding)
|
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the battery (A) and ECM (B).
...
Brake Line
Components
...
See also:
Knock Sensor (KS) Installation
•
Install the component with the specified torques.
•
...
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...
Copyright © www.kifomanual.com 2014-2025