Kia Forte: Intake Actuator Description - Blower - Heating,Ventilation, Air Conditioning - Kia Forte TD 2014-2018 Service ManualKia Forte: Intake Actuator Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Intake Actuator Description

The intake actuator is located at the blower unit. It regulates the intake door by the signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Climate Control Air Filter Replacement
1. Disconnect the stopper (B) from the glove box (A). 2. Disconnect the air damper (A) from the glove box (B). ...

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

See also:

Heater & A/C Control Unit (DATC) Component
Connector Pin Function Connector No. Description Connector No. Description A 1 Illumination (+) (Tail) A ...

Ignition Coil Removal
1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connec ...

Adjustment
Clutch Release Cylinder Air Bleeding Procedure    • Use the specified fluid. Av ...

Copyright www.kifomanual.com 2014-2026