1. |
Disconnect the stopper (B) from the glove box (A).
|
2. |
Disconnect the air damper (A) from the glove box (B).
|
3. |
Remove the filter cover (A) by pressing the knob.
|
4. |
Replace the air filter (A) with a new one according to the direction
of air filter.
|
5. |
Install in the reverse order of removal.
|
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...
Description
Component location : Manual transaxle
case
Operation principle : Back up lamp
switch is pushed by the reverse lug sliding when select arm, and switches the
back up lamp.
Funct ...
Thermostat Components
1. Water inlet fitting
2. Thermostat
3. Bypass hose
4. Heater pipe & hose assembly
...