1. |
Remove the crash pad side switch assembly (A) from the switch
panel on the crach pad of the driver's side.
|
2. |
Remove the ISG switch from the switch assembly.
|
3. |
Check the continuity between the switch 3 and 5 terminals as the
ISG OFF switch is engaged.
|
Mode Control Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode con ...
Limp Home Function
1.
Limp Home By Tester
If the ECM detects the fault of the Immobilizer or transponder,
the ECM will allow limp home function of the immobilizer. Limp home
is o ...
Inspection
[EVAP. Leakage Test]
1.
Select "Evap. Leakage Test".
2.
Proceed with the test according to the screen introductio ...