Kia Forte: Oil Pan Removal - Lubrication System - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Oil Pan Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Lubrication System / Oil Pan Removal

1.
Remove the under covers.
2.
Drain engine oil.
3.
Remove the oil pan (A).
(1)
Unfasten the bolts.
(2)
Insert the blade of SST (09215-3C000) between the lower crankcase and the oil pan. Separate the applied sealer and remove the oil pan.

  
Loosen one oil pan bolt near each corner of the oil pan leaving the bolts held in by about 2 threads. Then remove all other pan bolts.
  
Insert the SST between the oil pan and the lower crankcase by tapping it with a plastic hammer in the direction of arrow.
After tapping the SST with a plastic hammer along the direction of arrow around more than 2/3 edge of the oil pan, remove it from the lower crankcase.
Do not turn over the SST abruptly without tapping. It is result in damage of the SST.
Be careful not to damage the contact surfaces of the lower crankcase and the oil pan.
4.
Remove the oil screen (A) with the gasket (B).

Oil Pan Components
1. Oil screen gasket 2. Oil screen 3. Oil pan ...

Oil Pan Installation
1. Install the oil screen (A) with a new gasket (B). Tightening torque Bolt : 19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb ...

See also:

Description
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. Automatic Transaxle Fluid (ATF) passes ...

Circuit Diagram
...

Rearview camera
The rear view camera will activate with the ignition switch on and the shift lever in the R (Reverse) position. Note- during initial start up, system may not display instantly due to the audio ...

Copyright © www.kifomanual.com 2014-2024