Kia Forte: Positive Crankcase Ventilation (PCV) Valve Installation - Crankcase Emission Control System - Emission Control System - Kia Forte TD 2014-2018 Service ManualKia Forte: Positive Crankcase Ventilation (PCV) Valve Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Installation

1.
Installation is reverse of removal.

PCV Valve installation:
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft)

Positive Crankcase Ventilation (PCV) Valve Inspection
1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.    ...

Evaporative Emission Control System
...

See also:

Evaporator Temperature Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the evaporator temperature sensor connector (A). 3. ...

Removal
Back View Camera 1. Disconnect the negative(-) battery terminal. 2. Open the trunk and remove the trunk lid trim. (Refer to Body - & ...

Mode Control Actuator Description
The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing ...

Copyright © www.kifomanual.com 2014-2025