1. |
Disconnect the power door mirror switch module connector from
front door trip panel.
|
2. |
Check for the continuity between terminals of power door mirror
switch according to the table.
[Power Door Mirror Switch]
[Power Folding Mirror Switch]
|
Rear Seat Belt Retractor Component Location
(4Door, 2Door)
1. Rear seat belt retractor
(5Door)
1. Rear seat belt retractor
...
TCM Terminal Input/ Output Signal
Connector [A]
Pin
Description
Condition
Input/output value
Type
Level
1
-
...
On-board Refueling Vapor Recovery (ORVR) valve Removal
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump.
(Refer to Fuel System - "Fuel Pump&qu ...