1. |
Check the coil spring for crack and deformation.
|
2. |
Check the coil spring pad for damage and deformation.
|
High Mounted Stop Lamp Removal
[2 Door]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear roof trim.
(Refer to Body - "Roof Trim Assembly&qu ...
Accelerator Position Sensor (APS) Specification
Accelerator
Position
Output Voltage (V)
APS1
APS2
C.T
0.7 ~ 0.8
0.29 ~ 0.46
W.O.T
3.85 ~ 4.35
1.93 ~ 2.18
...
Power Outside Mirror Switch Inspection
1.
Disconnect the power door mirror switch module connector from
front door trip panel.
2.
Check for the continuity between termina ...