Kia Forte: Rear Torsion Beam Axle Components - Rear Suspension System - Suspension System - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Torsion Beam Axle Components

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Suspension System / Rear Suspension System / Rear Torsion Beam Axle Components

1. Rear torsion beam axle

Rear Coil Spring Inspection
1. Check the coil spring for crack and deformation. 2. Check the coil spring pad for damage and deformation. ...

Rear Torsion Beam Axle Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from f ...

See also:

Intake Air Temperature Sensor (IATS) Inspection
1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS termi ...

Receiver-Drier Replacement
1. Remove the condenser, and then remove the bottom cap (B) with a L wrench (A) from the condenser. Tightening torque : 9.8~14.7N.m ( ...

Specifications
AVN Head Unit Item Specification Power supply DC 14.4V negative ground Load Impedance 4ohm × 4 Tuning type PLL SYNTH ...

Copyright © www.kifomanual.com 2014-2025