1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
|
2. |
Remove a drip link assembly (A) after lowering a guide thoroughly
by pushing a slide to rear.
|
3. |
Remove the guide (A) and drip link (B).
|
4. |
Remove the drip link stopper (B).
|
5. |
Remove the drip link assembly (A).
|
6. |
Install in the reverse order of removal.
|
Mode Control Actuator Description
The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the mode control
actuator based on the signal of the A/C control unit. Pressing ...
Rheostat Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad side switch assembly (A).
3.
...
Emergency starting
Connect cables in numerical order and disconnect in reverse order.
Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehic ...