Kia Forte: Washer fluid

Checking the brake/clutch  fluid level

Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch* ...

Checking the washer fluid level

Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characterist ...

See also:

Output Speed Sensor Specifications
▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.1 ~ 1.55) 0.043 ~ 0.061 Output voltage ...

Injector Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line (Refer to the ...

Timing Chain Cover Installation
1. Install the timing chain cover. (1) Using a gasket scraper, remove all the old packing material from the gasket surfaces. ...