Kia Forte: 35R Clutch Control Solenoid Valve(35R/C_VFS) Circuit Diagram - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: 35R Clutch Control Solenoid Valve(35R/C_VFS) Circuit Diagram

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 35R Clutch Control Solenoid Valve(35R/C_VFS) Circuit Diagram

35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications
Direct control VFS[35R/C] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA) ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Engine Control Module (ECM) Installation
   When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. ...

Cylinder Head Inspection
Cylinder Head 1. Inspect for flatness. Using a precision straight edge and feeler gauge, measure the contacting surface of the cylinder block and the ma ...

Filler-Neck Assembly Removal
1. Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A). 2. Remove the rear-LH wheel, tire, and the i ...

Copyright www.kifomanual.com 2014-2026