Kia Forte: Component Location

Auto Head Lamp Leveling Device

...

Head Lamp Leveling Actuator Inspection with GDS

Initialization and diagnosis sequence by using GDS equipment. Below content summarize the procedure for A/S using GDS. No. Procedure 1 Locate vehicle to flat ...

See also:

Removal
1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross V ...

Air Ventilation Seat Unit Removal
Cushion Blower 1. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 2. Remove the cushion blower (A) ...