Kia Forte: Crankshaft Damper Pulley Inspection

Check the crankshaft damper pulley for vibration in rotation, oil dust deposit of V-ribbed part. Replace if necessary.

Crankshaft Damper Pulley Removal and Installation

1. Remove the RH front wheel. 2. Remove the drive belt. (Refer to Timing System - "Drive Belt") 3. ...

Front Oil Seal Components

1. Front oil seal ...

See also:

Special Service Tools
Tool (Number and Name) Illustration Use 09200-3N000 Engine support fixture (Beam) Removal and installation of the transaxle. Use this ...

Accelerator Position Sensor (APS) Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output volt ...

Front Hub / Knuckle Reassembly
1. Install the hub bearing to the knuckle assembly. (1) Lay the knuckle assembly (A) on press. (2) ...