Kia Forte: Cruise Control Switch Removal - Cruise Control System - Engine Electrical System - Kia Forte TD 2014-2019 Service ManualKia Forte: Cruise Control Switch Removal

Second generation YD (2014-2019) / Kia Forte TD 2014-2019 Service Manual / Engine Electrical System / Cruise Control System / Cruise Control Switch Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
3.
Remove the steering wheel.
(Refer to Steering System - "Steering Column and Shaft")
4.
Remove the steering wheel cover (A) after loosening the screw.

5.
Disconnect the steering heater connectors (A).

6.
Remove the steering remote control switch assembly after loosening the mounting screws (4EA).

7.
Disconnect the switch connectors (A).

8.
Remove the cruise control switch (A) after loosening the mounting screws.

Cruise Control Switch Inspection
[Measuring Resistance] 1. Check for resistance between terminals in each switch position. Function switch Connector termi ...

Cruise Control Switch Installation
1. Reassemble the cruise control switch after connecting the connector. 2. Reassemble the driver airbag module. ...

See also:

Rear Shock Absorber Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from f ...

Valve Body Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Control Cable Installation
   • When installing, set room side Shift lever and T/M side lever to N position. ...

Copyright © www.kifomanual.com 2014-2019