Kia Forte: Description - Evaporative Emission Control System - Emission Control System - Kia Forte TD 2014-2018 Service ManualKia Forte: Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Evaporative Emission Control System / Description

The Evaporative Emission Control System prevents fuel vapor stored in fuel tank from vaporizing into the atmosphere. When the fuel evaporates in the fuel tank, the vapor passes through vent hoses or tubes to a canister filled with charcoal.
The canister temporarily holds the vapor in the charcoal. The ECM will control the system in order to draw the gathered vapor into the combustion chambers during certain operating conditions. Engine manifold vacuum is used to draw the vapor into intake manifold.
Evaporative Emission Control System
...

Operation
Evaporative System Monitoring Evaporative And ORVR Emission Control System This system consists of a fill vent valve, fuel shut-off valve, fuel cut valve (for roll over), two way val ...

See also:

Alternator Removal
1. Disconnect the battery negative terminal. 2. Remove the drive belt. (Refer to Engine Mechanical System - "Drive Belt") ...

Fuel Tank Pressure Sensor (FTPS) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the rear seat. (Refer to Body - “Rear Seat ...

Rear Combination Lamp Installation
1. Install the rear combination lamp (Inside) assembly. 2. Install the rear combination lamp (outside) assembly. ...

Copyright © www.kifomanual.com 2014-2024