Kia Forte: Flywheel Removal and installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cylinder Block / Flywheel Removal and installation

1.	Remove the manual Transaxle. (Refer to Manual Transaxle System - "Manual Transaxle ")

2.

Remove the flywheel (A).

Tightening torque :

117.7 ~ 127.5 N.m (12.0 ~ 13.0 kgf.m, 86.8 ~ 94.0 lb-ft)

Do not reuse the bolts.

3.	Install in the reverse order of removal.

Flywheel Components

1. Flywheel ...

Rear Oil Seal Components

1. Rear oil seal ...

See also:

Positive Crankcase Ventilation (PCV) Valve Installation
1. Installation is reverse of removal. PCV Valve installation: 1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft) ...

Installation
1. Remove ignition key from the vehicle. 2. Disconnect the negative (-) cable from battery and wait for at least thirty seconds. ...

Tightening Torques
Item N.m kgf.m lb-ft Ignition coil installation bolt 9.8 ~ 11.8 1.0 ~ 1.2 7.2 ~ 8.7 Spark plug installation 14.7 ~ 24. ...

Categories

Copyright © www.kifomanual.com 2014-2026