1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the floor console assembly.
(Refer to Body - "Floor Console Assembly")
|
3. |
Disconnect the switch connectors (A).
|
4. |
Remove the switchs (A) from the console upper cover.
[Driver]
[Passenger]
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the rear door trim panel.
(Refer to Body - "Rear Door Trim")
|
3. |
Disconnect the connector from the power window switch.
|
4. |
Remove the power window switch (A) from the door trim after loosening
the screws.
|
Starter Inspection
Starter Solenoid Inspection
1.
Disconnect the lead wire from the M-terminal of solenoid switch.
2.
Connect the battery as shown. If ...
Components of the Tire Mobility Kit
0. Speed restriction label
1. Sealant bottle and label with speed restriction
2. Filling hose from sealant bottle to wheel
3. Connectors and cable for the power outlet direct connection
4. Hol ...
Accelerator Pedal Installation
1.
Install in the reverse order of removal.
Accelerator pedal module installation
nut:
12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11. ...