Kia Forte: Windshield Wiper-Washer Switch Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Windshield Wiper/Washer / Windshield Wiper-Washer Switch Installation

1.	Install the multifunction switch.

2.	Install the clock spring.

3.	Install the steering column upper and lower shrouds.

4.

Install the steering wheel.

Make sure the multifunction switch connectors are plugged in properly.

Windshield Wiper-Washer Switch Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the steering wheel. (Refer to Steering System - "Steering Wheel") ...

Front Wiper Motor Component Location

1. Cap 2. Nut 3. Wiper arm & blade 4. Retainer 5. Cowl top cover 6. Bolt 7. Wiper motor & linkage assembly ...

See also:

Positive Crankcase Ventilation (PCV) Valve Installation
1. Installation is reverse of removal. PCV Valve installation: 1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft) ...

Emergency while driving
In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the ENGINE START/STOP button for more than 2 seconds or 3 times succ ...

Head Lamp Leveling Actuator Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment. Below content summarize the procedure for A/S using GDS. No. Procedure 1 Locate vehicle to flat ...

Categories

Copyright © www.kifomanual.com 2014-2026