Kia Forte: Washer fluid

Checking the brake/clutch  fluid level

Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch* ...

Checking the washer fluid level

Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characterist ...

See also:

Transaxle Oil Temperature Sensor Installation
1. Install in the reverse order of removal.    After replacement or reinstal ...

Cooling Fan Circuit Diagram
...

Telemetics Unit (TMU) Installation
1. Install the MTS unit after connecting the cable and connector. 2. Install the glove box housing. 3. Connect ...