Kia Forte: Power Mosfet Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Power Mosfet Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Disconnect the power mosfet connector (A) and then remove the
power mosfet (B) after loosening the mounting screws.
|
| 3. |
Install in the reverse order of removal.
|
Power Mosfet Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of
the blower motor.
3. ...
Blower Resistor Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
re ...
See also:
IMS Power Seat Control Inspection
1.
Disconnect the IMS control switch connector.
2.
With the power IMS control switch in each position, make sure
that continuity ex ...
Replacement
•
Put on gloves to protect your hands.
&n ...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the smart junction box.
(Refer to Body Electri ...
Copyright © www.kifomanual.com 2014-2024