Kia Forte: Heater & A/C Control Unit (DATC) Replacement - Controller - Heating,Ventilation, Air Conditioning - Kia Forte TD 2014-2018 Service ManualKia Forte: Heater & A/C Control Unit (DATC) Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Controller / Heater & A/C Control Unit (DATC) Replacement

1.
Remove the audio unit.
(Refer to Body Electrical System - "Audio Unit")
2.
After loosening the mounting screws, remove the A/C & heater controller (A).

3.
Disconnect the A/C & heater controller connector (A).

4.
Install in the reverse order of removal.
Heater & A/C Control Unit (DATC) Self Diagnosis
1. Self-diagnosis process 2. How to read self-diagnostic code After the display panel blinks three times every 0.5 second, the ...

See also:

Engine coolant temperature gauge
This gauge shows the temperature of the engine coolant when the ignition switch is ON. Do not continue driving with an overheated engine. If the gauge pointer moves beyond the normal range are ...

Component Location
1. Sunroof 2. Sunroof switch 3. Sunroof motor & controller ...

Installation
1. Install the horn and connect the horn connector. 2. Reassemble the front bumper cover. ...

Copyright www.kifomanual.com 2014-2026