Kia Forte: Engine Room Under Cover Removal and Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Room Under Cover Removal and Installation

1.	Remove the under cover front panel (A).

2.

Remove the under covers (B).

Tightening torque:

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

3.	Install in the reverse order of removal.

Engine Room Under Cover Components

1. Under cover front pannel. 2. Engine room LH under cover 3. Engine room RH under cover ...

Engine Mounting Components

1. Transaxle mounting bracket 2. Roll rod bracket 3. Engine mounting bracket 4. Engine mounting support bracket ...

See also:

Operation
Evaporative System Monitoring Evaporative And ORVR Emission Control System This system consists of a fill vent valve, fuel shut-off valve, fuel cut valve (for roll over), two way val ...

Operating door locks from outside the vehicle
Turn the key toward the rear of the vehicle to unlock and toward the front of the vehicle to lock. If you lock/unlock the door with a key, all vehicle doors will lock/unlock automatically ...

Output Speed Sensor Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Categories

Copyright © www.kifomanual.com 2014-2026