Kia Forte: Front Oil Seal Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Timing System / Front Oil Seal Replacement

1.	Remove the crankshaft damper pulley. (Refer to Timing System - "Crankshaft Damper Pulley")

2.	Remove the front oil seal (A).

3.

Apply engine oil on the edge of new oil seal.

Remove any debris from the lip portion of the oil seal.

4.

Using the SST (09231-2E000), install a front oil seal (A).

Do not reuse the front oil seal.

5.	Install the crankshaft damper pulley. (Refer to Timing System - "Crankshaft Damper Pulley")

Front Oil Seal Components

1. Front oil seal ...

Timing Chain Cover Components

1. Timing chain cover 2. Service plug bolt & gasket ...

See also:

Ambient Temperature Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the engine room under cover front panel (A). 3. ...

Accelerator Position Sensor (APS) Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output volt ...

ISG OFF Switch Inspection
1. Remove the crash pad side switch assembly (A) from the switch panel on the crach pad of the driver's side. 2. Remove the ISG ...

Categories

Copyright © www.kifomanual.com 2014-2026