1. Camshaft bearing cap 2. Camshaft front bearing cap 3. Exhaust camshaft 4. Intake camshaft 5. Exhaust CVVT assembly 6. Intake CVVT assembly |
7. Cam carrier 8. Cylinder head 9. Cylinder head gasket 10. Retainer lock 11. Retainer 12. Valve spring |
13. Valve stem seal 14. Valve 15. Swing arm 16. Hydraulic lash adjuster (HLA) |
Injector Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the injector connector.
3.
Measure resistance between the inject ...
Tightening Torques
Engine Control System
Item
kgf.m
N.m
lb-ft
ECM installation bolt
0.8 ~ 1.2
7.8 ~ 11.8
5.8 ~ 8.7
ECM bracket ins ...
Variable Charge Motion Actuator (VCMA) Components
1. Coupling
2. Shaft
3. Stabilizer O-ring
4. Stabilizer
5. O-ring
6. Insert nut
7. Stabilizer Cover
8. Valve
9. Hole cover
...