Kia Forte: Alternator Installation - Charging System - Engine Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Alternator Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Charging System / Alternator Installation

1.
Install in the reverse order of removal.
2.
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical System - "Drive Belt")

Alternator installation bolt:
[M10] 29.4 ~ 41.2 N.m (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 Ib-ft)
[M8] 21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 15.9 ~ 23.9 Ib-ft)
Alternator brace mounting bolt:
21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 15.9 ~ 23.9 Ib-ft)

Alternator Removal
1. Disconnect the battery negative terminal. 2. Remove the drive belt. (Refer to Engine Mechanical System - "Drive Belt") ...

Alternator Disassembly
1. Remove the rear cover (A) after removing nuts (B). 2. Remove the mounting bolts (A) and the regulator assembly (B). ...

See also:

Compressor Disassembly
1. Remove the front right side tire. 2. Remove the engine room side cover (A). 3. Remove the wheel guar ...

Cowl Cross Bar Assembly Component Location
1. Cowl cross bar assembly ...

Using the usb device
To use an external USB device, make sure the device is not connected when starting up the vehicle. Connect the device after starting up. If you start the engine when the USB device is connected ...

Copyright © www.kifomanual.com 2014-2024