Kia Forte: Fuel Pump Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Fuel Pump Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pump Installation

1.
Install in the reverse order of removal.
  
Be careful of fuel pump direction when installing (Refer to the groove in the fuel tank).

Fuel pump plate cover installation bolt [LEV2]:
2.0 ~ 3.0 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2lb-ft)
Fuel Pump Plate Cover Installation [SULEV]:
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.4lb-ft)

Fuel Pump Removal
[LEV2] 1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line ...

Fuel Filter Removal
1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender ...

See also:

Engine start/stop button
Illuminated ENGINE START/STOP button Whenever the front door is opened, the ENGINE START/STOP button will illuminate for your convenience. The light will go off after about 30 seconds after the ...

Sunroof Sunshade Replacement
1. Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") 2. After loosening the mounting screws, then remove th ...

Front Pillar Trim Component Location
1. Front pillar trim ...

Copyright www.kifomanual.com 2014-2026