Items |
N.m |
kgf.m |
lb-ft |
Oil drain plug |
58.9 ~ 78.5 |
6.0 ~ 8.0 |
43.4 ~ 57.8 |
Oil filler plug |
58.9 ~ 78.5 |
6.0 ~ 8.0 |
43.4 ~ 57.8 |
Shift lever assembly mounting bolt |
8.8 ~ 13.7 |
0.9 ~ 1.4 |
6.5 ~ 10.1 |
Control shaft assembly mounting bolt |
19.6 ~ 26.5 |
2.0 ~ 2.7 |
14.5 ~ 19.5 |
Control cable bracket mounting bolt |
14.7 ~ 21.6 |
1.5 ~ 2.2 |
10.8 ~ 15.9 |
Control cable retainer mounting nut |
11.8 ~ 14.7 |
1.2 ~ 1.5 |
8.7 ~ 10.8 |
Back up lamp switch |
39.2 ~ 58.8 |
4.0 ~ 6.0 |
28.9 ~ 43.4 |
Speed sensor mounting bolt |
4.9 ~ 6.9 |
0.5 ~ 0.7 |
3.6 ~ 5.1 |
Transaxle support bracket mounting bolt |
58.9 ~ 78.5 |
6.0 ~ 8.0 |
43.4 ~ 57.8 |
Transaxle mounting bracket bolt |
88.3 ~ 107.9 |
9.0 ~ 11.0 |
65.1 ~ 79.6 |
Roll rod bracket mounting bolt |
49.0 ~ 63.7 |
5.0 ~ 6.5 |
36.2 ~ 47.0 |
107.9 ~ 127.5 |
11.0 ~ 13.0 |
79.6 ~ 94.1 |
|
Starter mounting bolt |
49.0 ~ 63.7 |
5.0 ~ 6.5 |
36.2 ~ 47.0 |
Transaxle upper mounting bolt (TM=>ENG) |
42.2 ~ 53.9 |
4.3 ~ 5.5 |
31.1 ~ 39.8 |
Transaxle lower mounting bolt (ENG=>TM) |
42.2 ~ 48.1 |
4.3 ~ 4.9 |
31.1 ~ 35.4 |
42.2 ~ 53.9 |
4.3 ~ 5.5 |
31.1 ~ 39.8 |
Components Location
1. AVN (A/V & Navigation head unit)
2. Tweeter speaker
3. Glass antenna amp (Radio)
4. Front door speaker
5. Rear door speaker
6. Antenna feeder cable jiont
7. Ant ...
Front Oil Seal Replacement
1.
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley")
2.
Remove the front oil seal (A) ...
35R Clutch Control Solenoid Valve(35R/C_VFS) Circuit Diagram
...