Kia Forte: Installation - Vehicle Speed Sensor - Manual Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Vehicle Speed Sensor / Installation

1.
Install in the reverse order of removal.
  
Do not reuse the O-ring (A).

Removal
1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

Manual Transaxle Control System
...

See also:

Back up lamp, Rear fog lamp
1. Take the lamp assembly out. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb by ...

Fuel Pump Motor Removal
1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender ...

Components
1. Reverse hose 2. Master cylinder 3. Ignition lock switch 4. Clutch switch 5. Clutch arm assembly 6. Pedal pad ...

Copyright www.kifomanual.com 2014-2026