Kia Forte: Control Shaft Complete Description

Component location : Control shaft assembly is mounted on the top of the manual transaxle

Function : Change the gear by shifting a shift lever.

Control Cable Adjustment

Select cable adjustment 1. Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin. 2. ...

Control Shaft Complete Removal

1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

See also:

EBD(Electronic Brake-force Distribution)
The EBD system (Electronic Brake force Distribution) as a sub-system of the ABS system is to control the effective adhesion utilization by the rear wheels. It further utilizes the efficie ...

Components
(4Door, 5Door) 1. Front pillar trim 2. Center pillar lower trim 3. Center pillar upper trim 4. Rear pillar trim 5. Rear wheel house trim 6. Cowl side trim ...

G-Sensor Calibration
1. Ignition "OFF", connect GDS. 2. Ignition "ON" & Engine "OFF" select vehicle name and ESC system. ...