Kia Forte: Rear Hub - Carrier Replacement

1.	Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported.

Remove the rear wheel and tire (A) from rear hub .

Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).

Remove the brake caliper mounting bolts, and then place the brake caliper assembly (A) with wire.

Tightening torque:

63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)

Loosen the mounting screws and then brake disc (A).

Tightening torque:

4.9 ~ 5.8 N.m (0.5 ~ 0.6 kgf.m, 3.6 ~ 4.3 lb-ft)

Loosen the bolts and then remove the hub bearing (A).

Tightening torque:

58.8 ~ 68.6 N.m (6.0 ~ 7.0 kgf.m, 43.3 ~ 50.6 lb-ft)

6.	Install in the reverse order of removal.

7.	Check the rear alignment. (Refer to Suspension System - "Rear Alignment")

1. Rear torsion beam axle assembly 2. Rear dust cover 3. Rear wheel hub assembly 4. Rear brake disc ...

1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...

Categories