Kia Forte: Inhibitor Switch Description

Inhibitor Switch monitors the lever's position(P, R, N, D) and is used to control gear setting signals.

SS-B Solenoid Valve(ON/OFF) Installation

1. Install in the reverse order of removal.    • ...

Inhibitor Switch Specifications

▷ Type: Combination of output signals from 4 terminals Power supply (V) 12 Output type Combination of output signals Signal Code Table ...

See also:

Components
1. Timing chain cover 2. Inner roter 3. Outer roter 4. Oil pump cover 5. Relief plunger 6. Relief spring 7. Relief plug 8. O-ring (suction side) 9. O-ring (disch ...

Electric Oil Pump Description
This transaxle has a standard Mechanical Oil Pump (MOP) linked to the input shaft to generates oil pressure when input shaft rotates. But, this transaxle equipped with ISG system also has ...

Line Pressure Control Solenoid Valve Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...