Kia Forte: Inspection

Components Location

1. Purge Control Solenoid Valve (PCSV) 2. Vapor line 3. ORVR valve 4. Fuel tank air filter 5. Canister Close Valve (CCV) 6. Canister 7. Fuel Tank Pressure Sensor ( ...

Canister Removal

[LEV2 Type] 1. Lift the vehicle. 2. Disconnect the vapor hose quick-connector (A) and ventilation hose (B). ...

See also:

Engine Coolant Temperature Sensor (ECTS) Installation
   • Install the component with the specified torques. • ...

General Inspection
After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symp ...

Input Speed Sensor Signal Waveform
Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...