1. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
2. |
Measure the distance the steering wheel can be turned without
moving the front wheels.
|
3. |
If the play exceeds standard value, inspect the steering column,
shaft, and linkages.
|
1. |
Position the vehicle on a level surface and place the steering
wheel in the straight ahead position.
|
2. |
Attach a spring scale to the steering wheel. With the engine speed
900 ~ 1100rpm, pull the scale and read it as soon as the tires begin
to turn.
|
3. |
If the measured value exceeds standard value, inspect the power
steering gear box and MDPS system.
|
Components
1. Slide motor
2. Height motor
3. Recline motor
4. Power seat control switch
5. Recline control switch
6. Lumbar support switch
7. Lumbar support motor
8. Tilt moto ...
Front Strut Assembly Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...
Exhaust Manifold Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
Disconnect the front and rear oxyge ...