Kia Forte: Installation - Horn - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Horn / Installation

1.
Install the horn and connect the horn connector.
2.
Reassemble the front bumper cover.
Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") ...

AVN System
...

See also:

Components Operations
ECM (Engine Control Module) 1. The ECM(PCM) (A) carries out a check of the ignition key using a special encryption algorithm, which is programmed into the transponder ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

DC/DC Converter Operation Principle
   • In the ISG mode, if the power of an audio system turns OFF by drawdown while “Auto ...

Copyright © www.kifomanual.com 2014-2024