1. |
Fix the rear view camera with the rear view camera holder.
|
2. |
Connect the rear view camera connector.
|
3. |
Install the trunk door trim.
|
Seat Belt Switch Inspection
1.
Remove the connector from the switch.
2.
Check for continuity between terminals.
Seat belt condition
Continu ...
Installation
1.
Install in the reverse order of removal.
A.
...
Engine coolant temperature gauge
This gauge shows the temperature of the engine coolant when the ignition switch
is ON.
Do not continue driving with an overheated engine.
If the gauge pointer moves beyond the normal range are ...