Kia Forte: Installation - Clutch Release Cylinder - Clutch System - Kia Forte TD 2014-2019 Service ManualKia Forte: Installation

Second generation YD (2014-2019) / Kia Forte TD 2014-2019 Service Manual / Clutch System / Clutch Release Cylinder / Installation

1.
Install in the reverse order of removal.
  
Apply the specified grease to the push rod end.

Specified grease: CASMOLY L9508
Quantity: 0.4 ~ 0.8 g

Removal
1. Drain the brake fluid through the bleed plug (A).    Х ...

Adjustment
Clutch Release Cylinder Air Bleeding Procedure    Х Use the specified fluid. Avoi ...

See also:

Compressor Removal
1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. ...

Engine Oil Inspection
1. Check the engine oil quality. Check the oil deterioration, entry of water, discoloring of thinning. If the quality is visibly poor, replace the oil. ...

Rear Disc Brake
Components 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

Copyright © www.kifomanual.com 2014-2019