Kia Forte: Line Pressure Control Solenoid Valve Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Line Pressure Control Solenoid Valve Specifications
Direct control VFS[Line Pressure]
▷ Control type : Normal high type
| Control Pressure kpa (kgf/cm², psi) |
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) |
| Current value(mA) |
50 ~ 850 |
| Internal resistance(Ω) |
5.1 |
Line Pressure Control Solenoid Valve Description
line pressure control solenoid valve is attached to the valve body. This
variable force solenoid valve directly controls the hydraulic pressure inside
the line pressure.
...
See also:
Smart key precautions
If you lose your smart key, you will not be able to start the engine.
Tow the vehicle, if necessary, and contact an authorized Kia dealer.
A maximum of 2 smart keys can be registered to a singl ...
ESC Control Module Removal
1.
Turn the ignition switch OFF.
2.
Pull up the lock of the HECU connector (A) , then disconnect the
connector.
...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Low Panal")
...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright www.kifomanual.com 2014-2026