Kia Forte: On-board Refueling Vapor Recovery (ORVR) valve Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Evaporative Emission Control System / On-board Refueling Vapor Recovery (ORVR) valve Removal
| 1. |
Turn the ignition switch OFF, and then remove battery (-) cable.
|
| 2. |
Remove the fuel pump.
(Refer to Fuel System - "Fuel Pump")
|
| 3. |
Remove the ORVR (A) after releasing hooks (B).
|
Canister Installation
1.
Installation is the reverse of removal.
Canister installation bolt/nut:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
On-board Refueling Vapor Recovery (ORVR) valve Installation
1.
Installation is the reverse of removal.
...
See also:
Front Driveshaft Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...
Components
...
Piston and Connecting Rod Disassembly
Engine removal is required for this procedure.
•
Use fender covers to avoid damaging pain ...
Copyright © www.kifomanual.com 2014-2025