Kia Forte: Refrigerant Line Replacement - Air Conditioning System - Heating,Ventilation, Air Conditioning - Kia Forte TD 2014-2018 Service ManualKia Forte: Refrigerant Line Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Refrigerant Line Replacement

1.
Discharge refrigerant from refrigeration system.
2.
Replace faulty tube or hose.
  
Cap the open fittings immediately to keep moisture or dirt out of the system.
3.
Tighten bolt or nut joints to the specified torque.
  
Connections should not be torque tighter than the specified torque.
4.
Evacuate air in refrigeration system and charge system with refrigerant.

Specified amount : 530 ± 25g (17.6 ± 0.88oz.)

5.
Inspect for leakage of refrigerant.
Using a gas leak detector, check for leakage of refrigerant.
6.
Inspect A/C operation.
Compressor Oil Specification
1. The R-134a system requires synthetic compressor oil (PAG) whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. ...

Compressor Description
The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperatur ...

See also:

Auto Defogging Sensor Description
The auto defogging sensor is installed on the front windshield glass. The auto defogging sensorr senses moisture on the windshild. The air conditioner control module receives the signal from ...

Special Service Tools
Tool (Number and Name) Illustration Use 09200-3N000 Engine support fixture (Beam) Removal and installation of the transaxle. Use this ...

ECM Terminal And Input/Output signal (M/T)
ECM Terminal Function Connector [CNG-MA] Pin No. Description Connected to 1 Ignition Coil (Cylinder #1) control output Ignition Co ...

Copyright www.kifomanual.com 2014-2026