Kia Forte: Removal - Seat Belt Buckle Sensor (BS) - SRSCM - Restraint - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Restraint / SRSCM / Seat Belt Buckle Sensor (BS) / Removal

1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to Body - "Front seat")
3.
Loosen the seat belt buckle mounting bolt and remove the seat belt buckle sensor (A).

Components
...

Installation
   Be sure to install the harness wires so they will not pinch or interfere with other parts. ...

See also:

Power Seat Control Switch Installation
1. Connect the connector and install the power seat control switch. 2. Install the seat cover. ...

Trunk Lid Trim Component Location
(4Door, 2Door) 1. Trunk lid trim ...

Removal
1. Separate the push rod (C) after remove the pin (A) and washer (B). 2. Remove the battery. (Refer to Engine Electrical S ...

Copyright www.kifomanual.com 2014-2026