Kia Forte: Severe driving conditions - Maintenance service - Maintenance - Kia Forte TD 2014-2018 Owners ManualKia Forte: Severe driving conditions

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Owners Manual / Maintenance / Maintenance service / Severe driving conditions

A- Repeatedly driving short distance of less than 5 miles (8 km) in normal temperature or less than 10 miles (16 km) in freezing temperature

B- Extensive engine idling or low speed driving for long distances

C-Driving on rough, dusty, muddy, unpaved, graveled or salt spread roads

D-Driving in areas using salt or other corrosive materials or in very cold weather

E-Driving in sandy areas

F - Driving in heavy traffic area over 90°F (32°C)

G- Driving on uphill, downhill, or mountain road

H-Towing a Trailer, or using a camper, or roof rack

I -Driving as a patrol car, taxi, other commercial use or vehicle towing

J - Driving over 106 mph (170 km/h)

K-Frequently driving in stop-and-go conditions

Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : Ins ...

Explanation of scheduled maintenance items
Engine oil and filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the car is being driven in severe conditions, more frequent oil and filt ...

See also:

CVVT & Camshaft Inspection
Camshaft 1. Inspect the cam lobes. Using a micrometer, measure the cam lobe height. If the cam lobe height is less than specification, replace the camsh ...

Exterior overview
1. Hood 2. Head lamp 3. Fog lamp 4. Wheel and tire 5. Outside rearview mirror 6. Front windshield wiper blades 7. Windows 8. Parking assist system 9. Front removable towing hook 10. D ...

Back up lamp, Rear fog lamp
1. Take the lamp assembly out. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb by ...

Copyright © www.kifomanual.com 2014-2024