Kia Forte: Spark Plug Installation - Ignition System - Engine Electrical System - Kia Forte TD 2014-2019 Service ManualKia Forte: Spark Plug Installation

Second generation YD (2014-2019) / Kia Forte TD 2014-2019 Service Manual / Engine Electrical System / Ignition System / Spark Plug Installation

1.
Install in the reverse order of removal.

Tightening torque:
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)

Spark Plug Removal
1. Remove the ignition coil. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug wrench, remove the spark plu ...

Charging System
...

See also:

Inspection
Component Inspection 1. Remove the clutch switch. (Refer to Clutch Switch - "Removal") 2. Push the clutch switch in the di ...

On-board Refueling Vapor Recovery (ORVR) valve Removal
1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump. (Refer to Fuel System - "Fuel Pump&qu ...

Knock Sensor (KS) Description
Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. Whe ...

Copyright © www.kifomanual.com 2014-2019