Kia Forte: Specification - Parking Assist System - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Specification

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Parking Assist System / Specification

Item
Specification
Ultrasonic sensor
Voltage rating
DC 12 V
Detecting range
30 cm ~ 120 cm
Operation voltage
DC 9 ~ 16 V
Operation current
MAX 300 mA
Operation temperature
-30°C ~ +80°C (-22°F ~ +176°F)
Operation frequency
48 ± 5 KHz
Number of sensors
Front
2
Rear
4

※ Parking assist control unit function and buzzer is built in BCM (body control unit).

Parking Assist System
...

Component Location
...

See also:

General Inspection
After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symp ...

Rear Body
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side outer p ...

Inspection (With GDS)
1. Check BCM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. ...

Copyright © www.kifomanual.com 2014-2024