Kia Forte: Telemetics Unit (TMU) Inspection - MTS System - Body Electrical System - Kia Forte TD 2014-2019 Service ManualKia Forte: Telemetics Unit (TMU) Inspection

Second generation YD (2014-2019) / Kia Forte TD 2014-2019 Service Manual / Body Electrical System / MTS System / Telemetics Unit (TMU) Inspection

1.
After replacing the TMU unit, access Dealer Engineering Mode in head unit.
(Refer to MTS system - "TMU Dealer Engineering Mode")
2.
Check the TMU version ("App S/W") from the head unit screen.
[Audio type]

[AVN type]

3.
Check the H/U Type from the head unit screen.
[Audio type]

[AVN type]

4.
Check the Model from the head unit screen.
[Audio type]

[AVN type]

Telemetics Unit (TMU) Installation
1. Install the MTS unit after connecting the cable and connector. 2. Install the glove box housing. 3. Connect ...

Smart Key System
...

See also:

Installation
1. Install in the reverse order of removal.    If the oil seal on the transaxle case side is da ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Fuel Pump Inspection
[Fuel pump] 1. Turn ignition switch OFF and disconnect the negative (-)battery cable. 2. Remove the fuel pump assembly. ...

Copyright © www.kifomanual.com 2014-2019