Kia Forte: Tires/Wheels

Rear Torsion Beam Axle Inspection

1. Check the hub for cracks and the splines for wear. 2. Check the rear axle carrier for cracks. ...

Tire Wear

1. Measure the tread depth of the tires. Tread depth [limit] : 1.6 mm (0.0630 in.) 2. If the re ...

See also:

Oil Pump Components
1. Inner roter 2. Outer roter 3. Oil pump cover 4. Relief plunger 5. Relief spring 6. Relief plug 7. O-ring (suction side) 8. O-ring (discharge side) ...

Crankshaft Position Sensor (CKPS) Inspection
1. Check signal waveform of CKPS and CMPS using a scan tool. Specification: Refer to “Waveform� ...

Brake Switch Inspection
1. Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in an ...