Kia Forte: Water pump Components

Water Temperature Control Assembly Removal and Installation

1. Remove the engine cover. 2. Drain the engine coolant. (Refer to Cooling System - "Coolant") 3. ...

Water pump Removal and Installation

1. Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to help drain the coolant faster. 2. Remove the drive ...

See also:

Inspection
1. Check the clutch release cylinder for fluid leakage. 2. Check the clutch release cylinder boot for damage. ...

Output Speed Sensor Signal Waveform
Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...

Inspection
If any of the following conditions occur, WCS reset and accuracy check should be performed. • The WCS ECU or any of the sensors is replaced. • ...