Kia Forte: 26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Direct control VFS[26/B]
▷ Control type : Normal low type
| Control Pressure kpa (kgf/cm², psi) |
9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) |
| Current value(mA) |
50 ~ 850 |
| Internal resistance(Ω) |
5.1 |
26 Brake Control Solenoid Valve(26/B_VFS) Description
26 Brake(26/B) Control Solenoid Valve is attached to the valve body. This
variable force solenoid valve directly controls the hydraulic pressure inside
the 26 Brake.
...
See also:
Fluid Service Adjustment Procedure
Oil level Check
A check of Automatic Transaxle Fluid (ATF) level is not normally
required during scheduled ...
Rear Spoiler Replacement
(5Door)
•
When prying with a flat-tip screwdriver, wrap it with
protective ...
Receiver-Drier Replacement
1.
Remove the condenser, and then remove the bottom cap (B) with
a L wrench (A) from the condenser.
Tightening torque :
9.8~14.7N.m ( ...
Copyright © www.kifomanual.com 2014-2025