Kia Forte: 26 Brake Control Solenoid Valve(26/B_VFS) Description

26 Brake(26/B) Control Solenoid Valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 Brake.

Torque Converter Control Solenoid Valve (T/CON_VFS) Installation

1. Install in the reverse order of removal.    • Adding Automatic ...

26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Direct control VFS[26/B] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) Current value(mA) ...

See also:

Inhibitor Switch Inspection
   • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contam ...

Mode Control Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode con ...

Inspection
Component Inspection 1. Remove the ignition lock switch. 2. Push the ignition lock switch in the direction of the arrow to make sure t ...